Download Living Dolphins 3D ScreenSaver

Looking for something special? Watch animated underwater world full of funny dolphins, fish, corals and mysterious relaxing sounds. The playful dolphins swim across your monitor and splash above a sunlit tropical ocean. Enjoy their amazing movement through the turquoise depths and the stunning jumps over the sea surface. Download Living Dolphins 3D Screensaver and bring vivid and attractive aquatic life to your desktop. Relax from the busy day and discover extraordinary beauty of the underwater world scenery!

Download Link....
http://rapidshare.com/files/74430772/Living3D.rar

Hide user account on your window

1. At first Click on Strat Menu > Run
2. Then type in GPEDIT.MSC and click ok or hit Enter. Note that : Only Windows Xp Professional have this Utility.
3. Now go to User Config >> Admin Templates >> Control Panel and double click on Hide specified Control Panel applets
4. Now put a dot in enabled, and click On Show
5. After the step four Click On click Add button and type in nusrmgt.cpl into the box.
   
   
   
   Anilraj(google)
   

Recover Display Error

If your system is running and monitor showing power light red,
There is serious problem so set data cable in both ends(Monitor and system)thats it problem solved.

Recovery Console

The Recovery Console is a feature of the Windows 2000, Windows XP and Windows Server 2003 operating systems. It provides the means for administrators to perform a limited range of tasks using a command line interface. Its primary function is to enable administrators to recover from situations where Windows does not boot as far as presenting its graphical user interface. As such, the Recovery Console can be accessed either through the original installation media used to install Windows, or it can also be installed to the hard drive and added to the NTLDR menu.

MagicISO 2

Guide to open .GBI file for free
Released by: MagicISO, Inc.
Web Site: http://www.magiciso.com/Setup_MagicISO.exe
Guide to open .GBI file for free

Guide to open .gbi file for free
Steps:

1. Run MagicISO
2. click "file"->"open"
3. Choose gbi file.
4. Click open button.

Create,edit,extract,convert,compress,encrypt,split and mount CD/DVD image file. MagicISO is a powerful CD/DVD image file processing and file compression tool, which allows you to create, extract, compress, edit and convert CD/DVD image files, and mount these files with internal virtual drive. And most of all, the compressed files can be used directly without decompressing.

MagicISO supports shell integration, such as context menu, Drag and Drop, clipboard...

With MagicISO, you can:
1. Process ISO / BIN image files, make bootable CD image file. MagicISO supports alomost all CD/DVD image file formats.
2. Mount image file with internal virtual drive, and then use the file without extracting it.
3. Compress files and folders to a compressed archive. MagicISO will scan and optimize the files during compression, and thus can have better compression ratio and faster compression speed.
4. Split the archive into multiple volumes.
5. Protect the archive with a password.
6. Use the archive directly without decompressing.
Contact infomation:
Guide to open .GBI file for free

How to fix a rundll error

* Why does this happen?
* How to fix a rundll error?
o Solution 1: Reboot your computer
o Solution 2: Install and Remove the program
o Solution 3: Locate the error with System Configuration
o Solution 4: Run an antispyware program or get online help
+ Anti Spyware

DLL files form part of a large record of codes and information that are used by many of the programs on your computer system. They are all linked to the Windows Registry and help to enhance the speed and memory effectiveness of your computer by using an identical code to run various tasks processed by various programs at a time. Hence, the rundll error arises when a program is not granted access to this particular code.

"Error Loading C:\windows\system 32\bridge.dll " is the kind of rundll error message that you can get.
Why does this happen?

This error can arise because a DLL file has been infected by a virus or is missing on the system due to a spyware. As the programs using this file will not be able to access it, there will be a rundll error to tell your system that the program cannot be loaded due to the missing code/file.
How to fix a rundll error?

To be able to locate where the error comes from, you can make use of internet tools or choose to fix it manually.

Solution 1: Reboot your computer
Sometimes, simply rebooting your computer can fix this problem. If it does not, you can choose from the other solutions below.

Solution 2: Install and Remove the program
This problem could have happened due to an incorrect program removal procedure. You can hence try to fix it by installing the program that has been removed and to correctly uninstall it either with the Uninstall option proposed by the program itself or through the Add/Remove feature found in the Control Panel menu.

* 1. Go to the Start menu and open Control Panel
* 2. Select Add/ Remove program option and locate for the program that you want to remove and click Remove.
* 3. When the procedure is over, delete any shortcuts that could have stayed and empty the Recycle Bin.
* 4. Reboot your system


Solution 3: Locate the error with System Configuration

* 1. Go to your Start menu and select the (Run) command
* 2. Enter (msconfig) to load the System Configuration Utility
* 3. When it shows up, choose the Selective Startup option and enable only one of its options.
* 4. Apply the changes and restart the computer.
* 5. If an error message appears concerning the specific option selected, you can either proceed to solution 4. Else, continue the same procedures until the rundll error appears for any specific selected option from the list.


Solution 4: Run an antispyware program or get online help

You should download a good an antispyware program and try to locate the malware or spyware that is corrupting the code or file needed to process the program.

You can get help online to try to fix this problem. There are some effective websites that can give you some wise tips on how to identify and delete this kind of threat or which will give you the necessary tools to fix rundll errors. Do not forget to note down the type of error that you are facing though.

Anti Spyware
* AVG
o Type: Free
o Download Link: http://free.avg.com/
* Spyware Doctor
o Type: Free Trial
o Download Link: http://www.pctools.com/spyware-doctor/
* Spy Emergency
o Type:Free
o Download Link: http://www.spy-emergency.com/

How to Delete Undeletable Files in Windows

Many times when trying to remove an unwanted program, especially a piece of adware or spyware, you may run across a file that is undeletable by any normal method. When you try to remove it you'll receive the error message shown below telling you "access denied" and explaining the file may be in use. You may also receive one of the following messages.

Cannot delete file: Access is denied
There has been a sharing violation.
The source or destination file may be in use.
The file is in use by another program or user.
Make sure the disk is not full or write-protected and that the file is not currently in use.


So if the file is in use, how do you delete it?

I'll show you several ways of removing these types of files and even some freeware programs that help you remove these pesky undeletable files.

Access Denied - Error deleting file

Windows 95/98/ME

If you are using Windows 95, 98, or Windows ME, the easiest way to remove an undeleteable file is to boot to a DOS prompt and manually delete the file. Before you do this, you'll want to make a note of the location of the file including the entire path to it. Follow the steps below to delete these types of files.
If you already know the path to the file, please skip to Step 7

1. Click on Start, Find, Files and Folders
2. Type the name of the undeletable file in the Named or Search For box
3. Make sure the Look In box shows the correct drive letter
4. Click on Find Now or Search Now and let the computer find the file
5. Once the file is located, right-click on it and choose properties, make a note of the file location. Usually this is something similar to

c:\windows\system32\undeleteablefilesname.exe
6. Close the search box
7. Locate a boot disk for your version of Windows, if you do not have a boot disk, follow the steps on the link below to create an emergency boot disk.

How to Create an Emergency Boot Disk for Windows

8. Shut down and restart your computer with the boot disk in your floppy drive.
9. The computer will boot to a DOS prompt that will look similar to

c:\

10. Type the following command and press Enter to delete the filer, substituting the phrase with the actual path and file name you discovered in Step 5 above.

del

Example:

del c:\windows\undeleteablefile.exe
11. Remove the boot disk in the floppy drive and restart your computer
12. The file should now be deleted.

Windows XP

In Windows XP, there are a couple ways to remove an undeleteable file, a manual way, and a couple automated ways using some freeware programs. First, I'll show you the manual way.

Manual Method

If you already know the path to the file, please skip to Step 7

1. Click on Start, Search, All Files and Folders
2. Type the name of the undeletable file in the box shown
3. Make sure the Look In box shows the correct drive letter
4. Click Search and let the computer find the file
5. Once the file is located, right-click on it and choose properties, make a note of the file location. Usually this is something similar to

c:\windows\system32\undeleteablefilesname.exe

6. Close the search box
7. Click on Start, Run, and type CMD and Press Enter to open a Command Prompt window
8. Leave the Command Prompt window open, but proceed to close all other open programs
9. Click on Start, Run and type TASKMGR.EXE and press Enter to start Task Manager
10. Click on the Processes tab, click on the process named Explorer.exe and click on End Process.
11. Minimize Task Manager but leave it open
12. Go back to the Command Prompt window and change to the directory where the file is located. To do this, use the CD command. You can follow the example below.

Example: to change to the Windows\System32 directory you would enter the following command and Press Enter

cd \windows\system32

13. Now use the DEL command to delete the offending file. Type DEL where is the file you wish to delete.

Example: del undeletable.exe
14. Use ALT-TAB to go back to Task Manager
15. In Task Manager, click File, New Task and enter EXPLORER.EXE to restart the Windows shell.
16. Close Task Manager

NTLDR is Missing.

Related errors:

Below are the full error messages that may be seen when the computer is booting.

NTLDR is Missing
Press any key to restart

Boot: Couldn't find NTLDR
Please insert another disk

NTLDR is missing
Press Ctrl Alt Del to Restart

Causes:

1. Computer is booting from a non-bootable source.
2. Computer hard disk drive is not properly setup in BIOS.
3. Corrupt NTLDR and/or NTDETECT.COM file.
4. Misconfiguration with the boot.ini file.
5. Attempting to upgrade from a Windows 95, 98, or ME computer that is using FAT32.
6. New hard disk drive being added.
7. Corrupt boot sector / master boot record.
8. Seriously corrupted version of Windows 2000 or Windows XP.
9. Loose or Faulty IDE/EIDE hard disk drive cable.
10. Failing to enable USB keyboard support in the BIOS.

Solutions:

Computer is booting from a non-bootable source

Many times this error is caused when the computer is attempting to boot from a non-bootable floppy disk or CD-ROM. First verify that no floppy diskette or CD is in the computer, unless you are attempting to boot from a diskette.

Note: This error has also been known to occur when a memory stick is in a card reader and the computer is attempting to boot from it. If you have any type of card reader or flash reader make sure that no memory stick is inside the computer. Additionally disconnect all USB drives, cameras, ipods, iphones, etc. from the computer.

If you are attempting to boot from a floppy diskette and are receiving this error message it is likely that the diskette does not have all the necessary files and/or is corrupt.

If you are attempting to install Windows XP or Windows 2000 and are receiving this error message as the computer is booting verify that your computer BIOS has the proper boot settings. For example, if you are attempting to run the install from the CD-ROM make sure the CD-ROM is the first boot device, and not the hard disk drive.

Second, when the computer is booting you should receive the below prompt.

Press any key to boot from the CD

Important: When you see this message press any key such as the Enter key immediately, otherwise it will try booting from the hard drive and likely get the NTLDR error again.

Note: If you are not receiving the above message and your BIOS boot options are set properly it's also possible that your CD-ROM drive may not be booting from the CD-ROM properly. Verify the jumpers are set properly on the CD-ROM drive. Additional information about checking the CD-ROM drive connections can be found on document CH000213.

Computer hard disk drive is not properly setup in BIOS

Verify that your computer hard disk drive is properly setup in the BIOS / CMOS setup. Improper settings can cause this error. Additional information on how to enter the BIOS / CMOS setup can be found in document CH000192.

Corrupt NTLDR and/or NTDETECT.COM file

Windows 2000 users
Windows XP users

Windows 2000 users

If your computer is using Microsoft Windows 2000 and you are encountering the NTLDR error. Create the below boot.ini file on the floppy diskette drive.

[boot loader]
timeout=30
default=multi(0)disk(0)rdisk(0)partition(1)\WINNT
[operating systems]
multi(0)disk(0)rdisk(0)partition(1)\WINNT="Microsoft Windows 2000 Professional" /fastdetect

Copy the NTLDR and NTDETECT.COM files from another computer using the same operating system. Both of these files are located in the root directory of the primary hard disk drive. For example, C:\NTLDR and C:\NTDETECT.COM should be the locations of these files on many computers.

• Please keep in mind that these files are hidden system files, if you need additional help with viewing hidden files in Windows please see document CH000516.

Once these files have been copied to a floppy diskette reboot the computer and copy the NTLDR and NTDETECT.COM files to the root directory of the primary hard disk drive. Below is an example of what commonly should be performed from the A:\> drive.

copy ntldr c:
copy ntdetect.com c:

After the above two files have been copied, remove the floppy diskette and reboot the computer.

Windows XP users

1. Insert the Windows XP bootable CD into the computer.
2. When prompted to press any key to boot from the CD, press any key.
3. Once in the Windows XP setup menu press the "R" key to repair Windows.
4. Log into your Windows installation by pressing the "1" key and pressing enter.
5. You will then be prompted for your administrator password, enter that password.
6. Copy the below two files to the root directory of the primary hard disk. In the below example we are copying these files from the CD-ROM drive letter, which in this case is "e." This letter may be different on your computer.
   
   copy e:\i386\ntldr c:\
   copy e:\i386\ntdetect.com c:\
   
   
7. Once both of these files have been successfully copied, remove the CD from the computer and reboot.

Misconfiguration with the boot.ini file

Edit the boot.ini on the root directory of the hard disk drive and verify that it is pointing to the correct location of your Windows operating system and that the partitions are properly defined. Additional information about the boot.ini can be found on document CH000492.

Attempting to upgrade from a Windows 95, 98, or ME computer that is using FAT32

If you are getting this error message while you are attempting to upgrade to Windows 2000 or Windows XP from Windows 95, Windows 98, or Windows ME running FAT32 please try the below recommendations.

1. Boot the computer with a Windows 95, Windows 98 or Windows ME bootable diskette.
2. At the A:\> prompt type:
   
   sys c:
   
   
3. After pressing enter you should receive the "System Transferred" message. Once this has been completed remove the floppy diskette and reboot the computer.

New hard disk drive being added

If you are attempting to add a new hard disk drive to the computer make sure that drive is a blank drive. Adding a new hard disk drive to a computer that already has Windows installed on it may cause the NTLDR error to occur.

If you are unsure if the new drive is blank or not try booting from a bootable diskette and format the new hard disk drive.

Corrupt boot sector / master boot record

It's possible your computer's hard disk drive may have a corrupt boot sector and/or master boot record. These can be repaired through the Microsoft Windows Recovery console by running the fixboot and fixmbr commands.

Additional information and help in getting into the Microsoft Windows Recovery console can be found on document CH000627.

Seriously corrupted version of Windows 2000 or Windows XP

If you have tried each of the above recommendations that apply to your situation and you continue to experience this issue it is possible you may have a seriously corrupted version of Microsoft Windows. Therefore we would recommend you reinstall Microsoft Windows 2000 and Windows XP.

If you are encountering this issue during your setup you may wish to completely erase your computer hard disk drive and all of its existing data and then install Microsoft Windows 2000 / Windows XP. Additional information about erasing the computer and starting over can be found on document CH000186.

Loose or Faulty IDE/EIDE hard disk drive cable

This issue has been known to be caused by a loose or fault IDE/EIDE cable. If the above recommendation does not resolve your issue and your computer hard disk drive is using an IDE or EIDE interface. Verify the computer hard disk drive cable is firmly connected by disconnected and reconnecting the cable.

If the issue continues it is also a possibility that the computer has a faulty cable, try replacing the hard disk drive cable with another cable and/or a new cable.

Computer Running Slowly

Delete Temporary files from C:\WINNT\Temp

• Open Internet Explorer, Click on Tools >> Internet Options
• Delete Cookies, Delete Files and Clear History
• Click on Start >> Run
• Type services.msc and Press Enter Key
• Search for Indexing Service and Double Click on it
• Select Disable from the drop-down under the StartUp Type
• Close the Services Window
• Click on Start >> Run
• Type regedit and Press Enter Key
• Press Ctrl+F and type ClearPageFileAtShutdown
• Once it is found, Press F3 key
• When the Search is Stopped, Press Enter Key
• Type the Dword Value as 0 (zero)
• Close the Registry Window
• Click on Start >> Run
• Type cmd and Press Enter Key
• Type devmgr_show_nonpresent_devices=1 and Press Enter Key
• Open the Device Manager and Click on View >> Show Hidden Devices
• Check for the Devices with a Light Color icon (These are devices which are disconnected already but take up time when Windows checks at StartUp) and if not wanted then Right Click and Click on Uninstall
• Restart the Computer
• Run the Defragmentation Utility
• When Defragmentation Utilty is finished, Restart the Computer Again

Access is Denied " Error Message When You Try to Open a Folder

To resolve this issue, you must turn off Simple File Sharing, and then take ownership of the folder:

• Turn off Simple File Sharing: a. Click Start, and then click My Computer
• On the Tools menu, click Folder Options, and then click the View tab
• Under Advanced Settings, click to clear the Use simple file sharing (Recommended) check box, and then click OK

• Right-click the folder that you want to take ownership of, and then click Properties
• Click the Security tab, and then click OK on the Security message, if one appears
• Click Advanced, and then click the Owner tab
• In the Name list, click your user name, Administrator if you are logged in as Administrator, or click the Administrators group
  If you want to take ownership of the contents of that folder, click to select the Replace owner on subcontainers and objects check box
• Click OK
  You may receive the following error message, where Folder is the name of the folder that you want to take ownership of: You do not have permission to read the contents of directory Folder. Do you want to replace the directory permissions with permissions granting you Full Control? All permissions will be replaced if you press Yes
  
• Click Yes
• Click OK, and then re-apply the permissions and security settings that you want for the folder and the folder contents

Computer Consuming more than 90% of CPU

• Open "Control Panel"
• Open "Administrative Tools"
• Do a RunAs on "Services" (If the User is not having Adminstrative rights)
• When the Services Application is opened,
• Scroll-down to "Indexing Service" and double-click it.
  If the service status is "Running", then stop it by pressing the "Stop" button.
• To make sure this service doesn't run again, under "Startup Type", choose "Disabled"
  RESTART THE COMPUTER When Done

Computer shutting down very Slowly

Start Registry Editor and navigate to the following key

• [HKLM\SYSTEM\CurrentControlSet\Control\Session Manager\Memory Management]
  
• Set ClearPageFileAtShutdown value to 0
  
• Shutdown the computer and you should notice the difference in the Shutdown Speed

Power On Self Test Beep Codes for AMI and Phoenix BIOS

1 short beep	Normal POST - system is ok
2 short beeps	POST Error - error code shown on screen
No beep	Power supply or system board problem
Continuous beep	Power supply, system board, or keyboard problem
Repeating short beeps	Power supply or system board problem
1 long, 1 short beep	System board problem
1 long, 2 short beeps	Display adapter problem (MDA, CGA)
1 long, 3 short beeps	Enhanced Graphics Adapter (EGA)
3 long beeps	3270 keyboard card

hort Beep	One beep is good! Everything is ok, that is if you see things on the screen. If you don't see anything, check your monitor and video card first. Is everything connected? If they seem fine, your motherboard has some bad chips on it. First reset the SIMM's and reboot. If it does the same thing, one of the memory chips on the motherboard are bad, and you most likely need to get another motherboard since these chips are soldered on.
2 Short Beeps	Your computer has memory problems. First check video. If video is working, you'll see an error message. If not, you have a parity error in your first 64K of memory. First check your SIMM's. Reseat them and reboot. If this doesn't do it, the memory chips may be bad. You can try switching the first and second banks memory chips. First banks are the memory banks that your CPU finds its first 64K of base memory in. You'll need to consult your manual to see which bank is first. If all your memory tests good, you probably need to buy another motherboard.
3 Short Beeps	Basically the same thing as 2 beeps. Follow that diagnosis above.
4 Short Beeps	Basically the same thing as 2 beeps. Follow that diagnosis above. It could also be a bad timer
5 Short Beeps	Your motherboard is complaining. Try reseating the memory and rebooting. If that doesn't help, you should consider another motherboard. You could probably get away with just replacing the CPU, but that's not too cost-effective. Its just time to upgrade!
6 Short Beeps	The chip on your motherboard that controls your keyboard (A20 gate) isn't working. First try another keyboard. If it doesn't help, reseat the chip that controls the keyboard, if it isn't soldered in. If it still beeps, replace the chip if possible. Replace the motherboard if it is soldered in.
7 Short Beeps	Your CPU broke overnight. Its no good. Either replace the CPU, or buy another motherboard.
8 Short Beeps	Your video card isn't working. Make sure it is seated well in the bus. If it still beeps, either the whole card is bad or the memory on it is. Best bet is to install another video card.
9 Short Beeps	Your BIOS is bad. Reseat or Replace the BIOS.
10 Short Beeps	Your problem lies deep inside the CMOS. All chips associated with the CMOS will likely have to be replaced. Your best bet is to get a new motherboard.
11 Short Beeps	Your problem is in the Cache Memory chips on the motherboard. Reseat or Replace these chips.
1 Long, 3 Short Beeps	You've probably just added memory to the motherboard since this is a conventional or extended memory failure. Generally this is caused by a memory chip that is not seated properly. Reseat the memory chips.
1 Long, 8 Short Beeps	Display / retrace test failed. Reseat the video card.

How to Fix Blue Screen Error

Blue screen crash will display all of your pending and an error screen that suddenly come to light that informs you that your screen is frozen. In addition, some errors DLL will also appear and ask if you recently added any new hardware or programs on your computer.

When this incident occurs, they have gone mad, especially if you have not saved or finish something you're working. Of course, you have to do your job again from the beginning. You would be really upset and angry, no? So what can you do to fix blue screen error like this?

The easiest and fastest way to solve this problem is to run a registry cleaner software. And if you've decided to let a technician fix your computer for you, stop there, you do not want to pay for something you can fix yourself, right?

Also, if you want to ask about any technician may be able to resolve the accident, which will undoubtedly tell you that it is a very complex matter and therefore should be treated by a professional like him. If the technician is not to say there will be no business left for him.

But in reality, what is going to do is just run a registry cleaner in the drive and then asks for the payment of reparations and the software used. Furthermore, unloading, installation and repair of the blue screen error using a software is not very difficult to do and that saves time and, well, why would you pay someone else just to make something simple for you?

Here are some things you can do to fix and solve your blue screen crash. This is especially useful if you're not familiar with the technical team and just want quick and simple solutions.

1. Restart your computer

Sometimes the blue screen comes out only once and then not again for a second time. In this case, a simple restart is just what you need to resolve the blue screen crash.
On the other hand, if the problem is more regular, you may have to deal with other things.

2. Replace your random access memory (RAM)

RAM is a hardware that is permanently installed inside the computer's motherboard. It is a rectangular piece that holds the information. This is where the CPU gets the instructions. And once this equipment is not functioning normally, without doubt, the computer crash in the blue screen. And so, the replacement of the RAM can be a solution.

3. Run a registry cleaner

A registry cleaner can eliminate errors in your record. This record stores all information about the software, drivers, applications and games that are installed on your computer. And in time, it can get bad, because some obsolete entries are not deleted and can lead to what they call the "blue screen of death."

By using a registry cleaner, the blue screen error can be eradicated and increases the speed of your computer in the process. In addition, the blue screen of death will not happen if you regularly check and care for your computer system.